Fault geometrical model of Dujiangyan section in Longmenshan fault zone          下载免费PDF全文

Hu-Rong Duan  Sheng-Lei Chen  Run Li  Quan-Chao Yan 《地震科学（英文版）》2018,31(3):126-136

The focal mechanism solution on the seismic fault plane can reflect the geometric and kinematic characteristics of faults, and it is an important way to further study the fine structure of fault plane. From the focal mechanism solution of the earthquakes around the Dujiangyan fault in Longmenshan fault zone, we derived the average dip angle of Dujiangyan fault is 45.1° based on the seismic moment tensor theory. In order to refine the fault geometry structure, this paper decomposed it into multiple sub-fault planes along the length and width of the fault plane and forms a number of models A13, B13, A23 a, A23 b, A23 c, B23 a,B23 b and B23 c, then calculated the sub-fault's dip of each model. In order to clarify exactly which one of the fault models is closest to the real fault model, the fault slip was carried out for each model in turn, then compared the surface displacement of each model with GPS observations. The results show that B23 c model with high dip in shallow and small dip in deep is the best model, the lengths of each subfault of Dujiangyan fault from south to north are 33 km, 21 km and 46 km, respectively. When the depth of the fault bottom is about 11 km, the dip angles are 70.56°, 67.41° and 45.55°.When the depth of the fault bottom is about 30 km, The fault dip angles are 44.55°, 29.18° and 44.25°.  相似文献   

Full moment tensor inversion constrained by double-couple focal mechanism for induced seismicity*          下载免费PDF全文

Yuyang Tan  Haijiang Zhang  Junlun Li  Chen Yin  Furong Wu 《地震科学（英文版）》2020,33(4):177-193

In this study, we propose a new method to determine full moment tensor solution for induced seismicity. This method generalizes the full waveform matching algorithm we have developed to determine the double-couple (DC) focal mechanism based on the neighbourhood algorithm. One major difference between the new method and the former one is that we adopt a new misfit function to constrain the candidate moment tensor solutions with respect to a reference DC solution in addition to other misfit terms characterizing the waveform matching. Through synthetic tests using a real passive seismic survey geometry, the results show the new constraint can help better recover the DC components of inverted moment tensors. We further investigate how errors in the velocity model and source location affect the moment tensor solution. The synthetic test results indicate that the constrained inversion is robust in recovering both the DC and non-DC components. We also test the proposed method on several real induced events in an oil/gas field in Oman using the same observation system as synthetic tests. While it is found that the full moment tensor solutions without using the DC constraints have much larger non-DC components than solutions with the DC constraints, both solutions are able to fit the observed waveforms at similar levels. The synthetic and real test results suggest the proposed DC constrained inversion method can reliably retrieve full moment tensor solutions for the induced seismicity.  相似文献   

2013年南斯科舍海岭M_W7.8地震的多点震源机制反演          下载免费PDF全文

张喆  许力生 《地球物理学报》2020,63(8):2978-2998

2013年11月17日，在南极南奥克尼群岛北、南极板块与斯科舍板块之间发生了一次M_W7.8级地震（2013年南斯科舍海岭M_W7.8地震），我们利用全球分布的长周期和宽频带地震记录反演确定了这次地震随时间和空间变化的震源机制，验证了提出的一种多点震源机制反演的新方法.首先利用长周期记录的W震相反演了这次地震的矩心矩张量解并利用体波提取了视震源时间函数，同时利用台阵反投影技术从宽频带记录中获得了这次地震的高频源的时空分布，然后基于矩心矩张量解、视震源时间函数以及高频源的时空分布，实现了采用新方法对2013年南斯科舍海岭M_W7.8地震的多点震源机制反演.矩心矩张量解表明，地震矩心在44.50°W/60.18°S，矩心深度19 km，半持续时间49 s，释放标量地震矩4.71×10²⁰ N·m，发震断层走向104°，倾角54°，滑动角8°.视震源时间函数清楚地揭示了地震矩随时间变化的方位依赖性，总体上可以将时间过程分为前60 s和后50 s两个阶段，但前60 s可细分为两次子事件.根据台阵反投影结果，这次地震为沿海沟从西到东的单侧破裂，破裂长度达311 km，可以分为5次子事件，能量释放的峰值点依次为13 s、30 s、51 s、64 s和84 s，平均破裂速度分别为0.6 km·s^-1、2.6 km·s^-1、2.3 km·s^-1、2.8 km·s^-1和3 km·s^-1.多点震源机制反演显示，5次子事件的矩震级分别为M_W7.57，M_W7.48，M_W6.80，M_W7.53和M_W7.08，半持续时间依次为21 s，17 s，6 s，16 s和8 s，走向分别为95°，105°，81°，98°和98°，倾角依次为57°，49°，86°，46°和64°，滑动角-9°，1°，-17°，13°和-4°.这些在震源机制、能量释放以及持续时间方面的变化都是当地构造和应力环境复杂性的反映.  相似文献   

STUDY ON RELATIONSHIP BETWEEN THE ACTIVITY OF MIYALUO FAULT AND WENCHUAN EARTHQUAKE SEQUENCE     

LI Zhen-yue  WAN Yong-ge  SHENG Shu-zhong 《地震地质》2019,41(1):72-83

Under the background of thrusting stress regime, a large number of strike-slip earthquakes occurred on the Miyaluo Fault during the Wenchuan earthquake sequence process, which is in the southern part of the Longmenshan Fault. In order to find the cause of their occurrence, stress tensors in subregions near the Miyaluo Fault are estimated. The result shows that in both north and south side of the Miyaluo Fault, the direction of principal compressive stress is nearly perpendicular to the Longmenshan Fault, and its dip is nearly horizontal, and the direction of tensile stress is nearly vertical. While in the Miyaluo fault zone, the direction of principal compressive stress is SWW-NEE, and its dip is nearly horizontal, the direction of principal tensile stress is NNW-SSE, also its dip is nearly horizontal. It is consistent with sinistral shear stress state in the Miyaluo fault zone. It was referred that the behavior of Miyaluo Fault during the Wenchuan earthquake sequence process was caused by tearing effect generated from unbalanced forces of two sides of the fault. To understand the rupture mode of the aftershocks in subregions as described above, the total seismic moment tensors are estimated by adding the corresponding component separately of the seismic moment tensor of aftershocks in each region. The result shows the similar trend of total seismic moment tensor components in the north and south side of the Miyaluo Fault(indicating the consistency of rupture mode in the north and south side of the Miyaluo Fault), and most seismic moment tensor components in the south side is higher than that in the north side, especially the compression component perpendicular to Longmenshan Fault and expansion component in the vertical direction. It indicates that thrusting component in the southeast direction in the south side is greater than that in the north side, and the thrusting difference causes the sinistral tearing effect of the Miyaluo Fault. We also find that the sinistral tearing component of the Miyaluo Fault is the same order of magnitude with the thrusting difference of its two sides, which indicates that the tearing effect of Miyaluo Fault can be completely explained by thrusting difference of its two sides. According to the analysis, we put forward the dynamic model of the Miyaluo Fault, which can explain the above phenomenon.  相似文献   

2018年9月8日墨江地震及周边地区构造应力场特征分析   总被引：1，自引：0，他引：1       下载免费PDF全文

李泽潇  万永革  崔华伟  李振月  胡晓辉  黄骥超  靳志同 《地球物理学报》2020,63(4):1431-1443

2018年9月8日,云南省墨江县发生MS5.9地震并伴随一系列余震,探究该地震周围的应力场对于理解该地震的发生机制和后续地震的发展趋势具有着重要的参考意义.本研究收集了震源及其邻区中前人研究和Global CMT所给出的震源机制资料,对该地区进行了构造应力场反演,并同时利用反演得到的应力张量模拟墨江地区的震源机制解表现.结果表明:(1)在应力轴整体分布上,自西向东σ1轴(压轴)从NNE-SSW向逐渐转向NNW-SSE向,σ3轴(张轴)从WWN-EES向逐渐转向WWS-EEN向,张轴呈弧形分布,压轴呈放射状分布.(2)在应力轴倾伏角上,研究区域内的压应力轴和张应力轴倾伏角都比较小,即两轴均接近水平.(3)R值分布大体是在东南部相较于西北部大,结合当地地质背景分析得到,物质逃逸自西北向东南呈逐渐变缓的趋势.(4)利用反演得到的应力张量和应力状态计算墨江地震震源区的相对剪应力和相对正应力大小.由此推测,墨江地震恰好发生在相对剪切应力值和相对正应力正值最大的节面上.从而可以确定墨江地震的发震节面的基本参数:走向216.32°,倾角86.91°,滑动角0.27°,相对剪应力值0.9,相对正应力值0.3.本研究为此次墨江地震的发震背景和地震动力学研究提供了基础性资料.  相似文献   

藏南泽当地区大反向逆冲断层变形研究——以磁组构与EBSD组构分析为例     

曹新文  孙知明  黄宝春  曹勇  裴军令  叶小舟  刘思琪 《岩石学报》2021,37(10):3167-3184

仁布-泽当逆冲断层是喜马拉雅大反向逆冲断层（GCT）在藏南地区的重要延伸部分,也是喜马拉雅造山带北部边界新生代最为活动的构造单元之一。新生代以来特提斯喜马拉雅的构造变形组构特征的研究对于深入理解碰撞造山带演化与高原隆升具有重要构造意义。本文综合GCT泽当-琼结段断层的宏观与微观变形特征,对断裂带石英脉、围岩中石英和云母矿物的电子背散射（EBSD）组构及断层两侧岩石磁组构（AMS）特征进行对比分析。结果表明对AMS主要贡献来自顺磁性云母、绿泥石等,磁化率各向异性椭球体以压扁状为主,磁面理与构造面理（劈理、断层面）基本重合,显示较强的构造变形磁组构特征;磁线理优选方向近南北向,且与观测北向逆冲断层方向一致,揭示剪切作用在变形过程中的持续作用。研究发现泽当地区GCT附近石英微观结构从围岩至断层区,石英至少呈现3种不同类型的微观变形机制：围岩区溶解蠕变、断裂带石英以膨凸重结晶和亚颗粒旋转重结晶作用为主。断裂带石英的c轴EBSD组构指示变形为低温（300~400℃）环境,其中黑云母的结晶学优选（CPO）与磁组构主轴优选方向存在高度的一致性,进一步证实了顺磁性矿物黑云母对AMS的主要贡献。综合研究表明泽当地区GCT的韧性变形是断层处在中上地壳韧性带的活动阶段变形的结果,也代表了特提斯喜马拉雅在碰撞、高原隆升期的变形主要特征。  相似文献   

Prediction of application scope of vertical fracture strike based on scattered wave fracture orientation function     

TANG Yufei  LIU Yuwei  LIU Xiwu  YANG Guodong 《世界地质(英文版)》2015,18(1)

Fracture system plays a very important role in the enrichment and accumulation of oil and gas in the reservoirs. Based on scattering wave information,Fracture Orientation Function( FOF) was built,which can be used to predict the fracture orientations. However,this method has only been verified by physical experiments without studies on the application scope. In this study,based on the linear sliding theory,FOF of the scattering wave was applied to the numerical simulation and the application scope was further studied according to fracture flexibility tensor. According to the fractures filled with gas and liquid,numerical simulation was conducted on the models with various fracture flexibilities. Numerical simulation results were used to inverse fracture orientation with the aid of the FOF of the scattering wave. The results show that it is workable to predict the vertical fracture orientation with the FOF of the scattering wave. Application of this method is more effective when the fractures are filled with gas than liquid. Moreover,the application scope can be predicted by the fracture flexibility.  相似文献   

An experimental study of effect of pre‐existing fabric on deformation of foliated mylonite at high temperature and pressure     

Gui Liu  Yongsheng Zhou  Changrong He  Wenming Yao  Junlai Liu  Yuanyuan Zhang 《Geological Journal》2016,51(1):92-112

We performed deformation experiments on a foliated mylonite under high temperature and pressure conditions in this study. To investigate the effect of pre‐existing fabric on the rheology of rocks, our samples were drilled from natural mylonite with the cylinder axis parallel to the foliation (PAR) and perpendicular to the foliation (PER). We performed 25 tests on seven PAR samples and 21 tests on seven PER samples at temperatures ranging from 600 to 890 °C, confining pressures ranging from 800 to 1400 MPa, and steady‐state strain rates of 1 × 10⁻⁴, 1 × 10⁻⁵ and 2.5 × 10⁻⁶ s⁻¹. In the temperatures of 600–700 °C, the deformation is accommodated by semi‐brittle flow, with the average stress exponent being 6–7 assuming power law flow; in the temperature range of 800–890 °C, deformation is mainly by plastic flow, with an average stress exponent of n = 3 and activation energies of Q = 354 ± 52 kJ/mol (PER and PAR samples). The experimental results show that the strengths of PER samples are higher than those of PAR samples. Deformation microstructures have been studied by optical and electron microscopy. The original foliation of PER samples is destroyed by deformation and replaced by a new foliation, but the deformation of PAR samples followed the original foliation. Electron backscatter diffraction (EBSD) measurements show a strong lattice preferred orientation (LPO) of the quartz c axis fabrics of the starting samples and deformed PER and PAR samples. However, the c axis fabric of quartz in experimentally deformed PER and PAR samples varied with temperature and strain rate is different from that seen in the starting mylonite sample. The initial quartz c axis fabric of the starting mylonite sample has been transformed into a new fabric during experimental deformation. Dehydration melting of biotite and hornblende occurred in both PER and PAR samples at temperatures of 800–890 °C. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

山西榆社盆地新近系马会组砾岩层砾组特征及其地质意义   总被引：2，自引：1，他引：1  

钱程  韩建恩  余佳  贺承广  朱大岗  孟宪刚  邵兆刚  王津 《现代地质》2011,25(4):778-788

通过对山西榆社盆地新近系中新统马会组砾岩层的分布特征、剖面特征和砾组特征分析,结合盆地内部和四周山区的岩性特征分析,阐述了砾岩层本身的性质、成因、来源和搬运方式等,探讨砾石沉积时盆地的水动力条件、气候环境、地貌特征和构造条件等。研究表明,马会组砾岩层为榆社盆地新近纪河湖相沉积的底砾岩,其中所含的3层砾岩在成因、来源、搬运和沉积环境上具有较好的一致性。马会组砾岩层为多期次、多来源、非稳定的冲湖积成因,为湖泊水进期的沉积物,指示干冷向温湿转变的气候环境;砾石的主要来源是盆地内部的基底地层及其东缘、北缘和西缘的山区;砾石遭受了较强的物理化学作用,还存在一定的生物作用;含量较少的花岗岩砾石经受了较长距离的搬运,其他岩性砾石经受了近—中距离的搬运。榆社盆地为喜马拉雅运动二幕晋东地区山地相对抬升形成的山间盆地,砾石沉积时已形成了中间低、四周高的盆地雏形。  相似文献   

胶东大磨曲家金矿床岩石磁组构、构造变形与金矿化     

江少卿  郝梓国  高帮飞  周应华 《地质通报》2011,30(9):1418-1428

在胶东地区招远-平度断裂带上的大磨曲家金矿区选取了典型的构造区域进行岩石磁组构研究。沿着断裂带在不同构造部位的36个采样点钻取了112个定向岩心样品,所有样品均沿勘探线布置。磁组构研究显示,研究区以弱磁性岩石为主,总体上,胶东群变质岩的磁化率值较高,而玲珑黑云母花岗岩的磁化率值较低,尤以碎裂程度高的强蚀变岩的磁化率值最低;磁化率各向异性方位主要为NE向挤压,磁组构所指示的构造应力场与大磨曲家矿区的区域挤压应力方向是相同的;对具不同程度矿化的81线的Au含量与80线磁组构各向异性度(P值)进行对比研究发现,P值与金品位呈负相关关系;弱矿化糜棱岩中的金矿化在磁面理发育的岩石中较为发育,成矿晚期,Au元素含量随着岩石磁性的减弱而增加,特别是在强应变后弛豫阶段矿液充填于相对张性的石英脉中Au含量最高。  相似文献